Free electronic circuit design and schematic diagram
This is a video tutorial about RJ45. This video shows how to punch down an RJ45 keystone jack using a impact tool. The first thing that we gonna do is strip the wire. It is very important because when we connect the wire, it can cause the problem. And then, put the wire on RJ45, after that punch it down […]
Read moreThis is a video tutorial about multimeter. This video shows how to use a multimeter. The multimeter can be used to measure voltage, current, resistance, etc. The multimeter that is used in this video is a digital multimeter. First thing that must be done before use the multimeter is calibrate the multimeter by connecting each probe. Here is the video […]
Read moreThis is a video tutorial of desoldering. This video shows the technique of desoldering the IC. The wrong technique will cause the overheating to the IC. There are two thing that are required to desolder the IC, they are solder and solder sucker. That would be easy if we use the solder in the left hand and the solder sucker […]
Read moreThis video is a tutorial of lamp dimmer using PWM. This video shows the use of PWM for lamp dimmer. In this video, the PWM kit uses a 555 IC. The brightness of the lamp is dimmed by changing the pulse. If we up the pulse slowly, the intensity of the lamp getting brighter. Here is the video :
Read moreThis is a video tutorial of DC motor control. This video shows how to control the DC motor speed. In this video, speed of the DC motor is controlled by changing the power supply. Increasing speed can be done by increasing the voltage, and decreasing the voltage will decrease the speed of DC motor. Here is the video : To […]
Read moreThis is a video tutorial of logic probe or logic analyzer. This video shows what is logic probe and how can the logic probe analyzes. There are two main operation in the logic probe work, first is timing analyze and second is state analysis. In this video also shows the different between them. Beside that, this video shows the sequential […]
Read moreThis video is tutorial how to use oscilloscope. This video shows how to use the oscilloscope. The first thing to do is prepare the probe, the simulator generator and the simple circuit. And then turn on the oscilloscope and calibrate the oscilloscope. From the oscilloscope we can obtain some information, such as the voltage of circuit, frequency, and period. here […]
Read more