Free Circuit Diagram

Quadrature oscillator generate two sine-wave signal, but one signal is shifted 90 degree from the other signal. One output that lead the other called cosine signal, and the other is called sine. Here is the schematic diagram of the circuit: This circuit is another type of pahase shift oscillator, with three phase shifter [...]

Bubba oscillator is another example of phase shift oscillator. The Bubba oscillator takes the advantage of quad op-amp package to get 45 degree phase shift for each section. The result is excellent d(phase)/d(t) to get very low frequency drift. Here is the schematic diagram of the circuit: Each RC section give 45 degree [...]

With very low harmonic distortion, 2N4416 JFET is suitable to smoothly oscillate in a circuit. On application where low harmonic content is required for a good mixer circuit, JFET local oscillator is very good. Below is the circuit diagram of Low Distortion Oscillator: And here’s the 20 MHz Oscillator Values [...]

Sawtooth wave oscillator is used in cathode ray tube deflection circuitry, in a PWM modulator, or in a analog to digital conversion. You can also use it in your own design, only your imagination can limit its application. Here is one example of the circuit: The frequency is determined by C1, R1, R2, [...]

Crystal Colpitts oscillator can be implemented using a transistor and a parallel mode crystal. Here is the schematic diagram of  the circuit: In this circuit, the crystal acts as an inductance. A large value capacitive divider is used between gate, source, and ground, and a small series capacitor is placed in the crystal [...]

This is a Colpitts-crystal oscillator circuit. It is suitable for low frequency crystal oscillator circuits. Using the 2N3823 JFET, this circuit has excellent stability because the temperature will not vary the 2N3823 JFET circuit loading. Here is the circuit : [Source: National Semiconductor Application Note]