
This charger circuit is suitable for lead-acid battery, including flooded, gel, and AGM types. The automatic term means that this charger will stop charging automatically when the battery voltage reach a certain pint, indicating that the battery has been fully charged, and charging will be restarted if the battery voltage falls below that threshold. A [...]
Read the rest of this article [..]

The Battery Charger Circuit This lead acid battery charger circuit design is very simple and smart. I call it a smart battery charger design because it uses only few components to support many features. Here is the schematic diagram of the circuit: This circuit is suitable for a general purpose lead acid [...]
Read the rest of this article [..]

Many cheap battery chargers usually assume that charging the battery slowly is OK although the battery is already full of charges. All they do is usually charging the battery with constant current no matter if the battery is almost completely discharged or has been fully charged. Off course the battery wouldn’t be damaged immediately [...]
Read the rest of this article [..]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single [...]
Read the rest of this article [..]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]
Read the rest of this article [..]

More efficient lead acid battery charger can be implemented using switch mode circuit. A switch mode for lead acid battery charger can be constructed using bq24105 battery charger controller. The bq24105 was originally designed to charge single-, two- or three-cell Li-ion and Li-polymer battery packs. Its features doesn’t include the control for lead acid battery [...]
Read the rest of this article [..]