Free Circuit Diagram

Basic interruptible Power Supply Circuit consist of regular power supply adapter and battery connection. This basic system is a “hot” battery connection, meaning that there is no switching mechanism in connecting and disconnecting the battery, the battery is always connected! This hot connection is very simple to implement and very robust because there would [...]

Notch filter is known as band-cut filter or band-reject filter. The fuction of this filter is to remove some frequency portion of a signal. The schematic diagram of this filter circuit, a second order notch filter is depicted in the figure below. The formula is actually complicated, but by taking the R3=R4 and [...]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]

The high durability nature of a light emitting diode (LED) make it suitable for ON/OFF indicator application. Because the limitation on low operating voltage, LEDs are normally applied on low voltage application.  Fortunately, there is a simple method to apply LED indicator for high powerline voltage: reactance of a capacitor can be used to limit [...]

The simple low-pass filter is shown in Figure below. The filter has a 20dB/decade roll-off after its corner frequency fc. Its low-pass frequency gain (f->0) is defined by R3/R1. This allows low-frequency gains other than unity to be obtained.  R2 should be chosen equal to the parallel combination of R1 and R3 to minimize error [...]