Free Circuit Diagram

This is pressure sensor signal conditioning circuit. It is simple and inexpensive circuit because it has small geometry and simple pressure sensor. It just uses a single Operational Amplifier. This circuit obtain power from from 3-V battery. To work properly this circuit must work in  0 C to 50 C temperature range. Here is the [...]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]

A modulated current is provided by the integrated rotational speed sensor KMI 15/x. This current signal must be converted to ground referenced voltage signal, matching the logic levels of the processing unit for digital signal processing. This signal conditioning can be done by using this circuit. This circuit consist of protective elements to suppress line [...]

Incandescent lamp has been used to reduce harmonic distortion in sine oscillator circuit. The nonlinear resistance characteristic of the lamp filament help the circuit to shape the signal to approximate the ideal sine wave. Here is the classic Wien-bridge oscillator circuit using the incandescent lamp: You can change the frequency of the oscillator [...]

The signal can be converted by piezoelectric films in many ways such as thermal to electrical (temperature sensor), mechanical to electrical (microphone), and electrical to mechanical ( a loudspeaker). The circuit is signal conditioning amplifier for piezofilm sensor which use three op amps and has a high-input-impedance differential charge. Here is the circuit : [...]

This is a circuit of board system monitoring for temperature and voltage condition. It uses the NE1617A. The NE1617A is a 2 channel temperature sensor. It can measure remote and internal sensor. It also supports up to nine devices per bus. The temperature data update is selectable from 125 ms to 16 seconds, if it [...]