Free Circuit Diagram

Bubba oscillator is another example of phase shift oscillator. The Bubba oscillator takes the advantage of quad op-amp package to get 45 degree phase shift for each section. The result is excellent d(phase)/d(t) to get very low frequency drift. Here is the schematic diagram of the circuit: Each RC section give 45 degree [...]

PLL oscillator is used to get very stable frequency woth very low distortion of sine wave output. The stability is equal to crystal-based oscillator, and the low distortion level of the sine wave output is equal to LC based oscillator. The method of PLL control in PLL oscillator is done by adjusting the frequency of [...]

Imagine you have a master controller device that control other devices in your house, and you don’t need to install any additional wires to facilitate the data communication between the master controller and the controlled devices. Yes you’s life will be easier since all you need is just plugging your devices into your power line [...]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]

Quadrature oscillator generate two sine-wave signal, but one signal is shifted 90 degree from the other signal. One output that lead the other called cosine signal, and the other is called sine. Here is the schematic diagram of the circuit: This circuit is another type of pahase shift oscillator, with three phase shifter [...]