FreeCircuitDiagram Articles Search
Custom Search



Analog Compensation Circuit for PT100 RTD Temperature Sensor

circuit schematic

There are some digital and analog that can be used for compensating a PT100 RTD nonlinearity. We can implemented the digital linearization by implementing the previous generic equation  or by a lookup table. By implementing the previous generic equation we can calculate temperature values directly, based on the actual measured RTD resistance. A lookup table [...]



Read the rest of this article [..]

Notch Filter: The Circuit’s Diagram and The Design Formula

circuit schematic

Notch filter is known as band-cut filter or band-reject filter. The fuction of this filter is to remove some frequency portion of a signal. The schematic diagram of this filter circuit, a second order notch filter is depicted in the figure below. The formula is actually complicated, but by taking the R3=R4 and [...]



Read the rest of this article [..]

Analog Fan Speed Control

circuit schematic

The large issue today that caused by more electronic equipment enters the home and the office is noise of fan. to reduce fan noise, a variable speed fan is used because it permits quieter and slower, fan speed when temperature conditions allow. To build a variable speed fan we can use digital control or high-speed/low-speed [...]



Read the rest of this article [..]

Square Oscillator Using Comparator: The Circuit Schematic Diagram and The Formula

circuit schematic

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]



Read the rest of this article [..]

Differential Analog Switch

circuit schematic

This is a circuit of differential analog switch. This circuit uses  the FM1208 monolithic dual. Here is the circuit: This circuit is ideal choice for an accurate multiplexer because RDS (on) for the monolithic dual tracks at better than ± 1% over wide temperature ranges (-25 to +125°) although it is unusual. [...]



Read the rest of this article [..]

Wien Bridge Oscillator: The Circuit Schematic Diagram and The Design Formula

circuit schematic

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]



Read the rest of this article [..]




 Page 1 of 53  1  2  3  4  5 » ...  Last »