
This constant current constant voltage SMPS can be used to efficiently charge a battery. This circuit gives 7.2V at constant voltage mode, and 600 mA at constant current mode. Here is the schematic diagram of the circuit: The mechanism is simple, when the load impedance is high, then the output voltage will be [...]
Read the rest of this article [..]

In the simplest form, current to voltage converter can be implemented as simple as one resistor, since a voltage is developed when an electrical current flow against a resistance. The problem is that the resistance always affect the current by decreasing the current flow, and the current to voltage conversion is not accurate. In some [...]
Read the rest of this article [..]

High voltage current sensing/monitoring can be designed using LTC6101 op-amp. The following current sensing circuit is capable of measuring electrical current in 500 volts system. Here is the schematic diagram of the circuit: Two external Mosfets is added to hold off the voltage, allows the LTC6101 to be connected to a very high [...]
Read the rest of this article [..]

In application that demand for high current, Nicad (NiCd) rechargeable battery still has the unbeatable performance compared to NiMH and Lithium battery. The charger circuit here is smart in the way it handle the wrong polarity of the battery placement. The core of this battery charger circuit is the Q2, configured a constant [...]
Read the rest of this article [..]

A constant-current/constant-voltage linear charger for single-cell lithium-ion (li-ion) can be constructed using only a tiny battery charger controller chip EUP8054 and a few passive components. This tiny integrated circuit chip is suitable for various portable devices. This controller chip is also compatible with USB power specification, ideal for charging the battery when the device is [...]
Read the rest of this article [..]

All of the necessary circuitry to optimally control the charge and hold cycle for sealed lead acid battery can be implemented using UC2906 series of battery charger controllers. These integrated circuits monitor and control both the output voltage and current of the charger through three separate charge states; a high current bulk-charge state, a controlled [...]
Read the rest of this article [..]