Free Circuit Diagram

This constant current constant voltage  SMPS can be used to efficiently charge a battery. This circuit gives 7.2V at constant voltage mode, and 600 mA at constant current mode. Here is the schematic diagram of the circuit: The mechanism is simple, when the load impedance is high, then the output voltage will be [...]

More efficient lead acid battery charger can be implemented using switch mode circuit. A switch mode for lead acid battery charger can be constructed using bq24105 battery charger controller. The bq24105 was originally designed to charge single-, two- or three-cell Li-ion and Li-polymer battery packs. Its features doesn’t include the control for lead acid battery [...]

This is AC mode universal motor drive circuit. This circuit is suitable for large range of application. It uses the microcontroller to interpret the user interface that is used to select the four operating modes that are defined in hardware. Here is the circuit : As power switch, this circuit use “SNUBBERLESS” TRIAC  [...]

All of the necessary circuitry to optimally control the charge and hold cycle for sealed lead acid battery can be implemented using  UC2906 series of battery charger controllers.  These integrated circuits monitor and control both the output voltage and current of the charger through three separate charge states; a high current bulk-charge state, a controlled [...]

Using this switch mode regulator circuit, you can get a stable 12 volt output (500mA) although you just have 4,3 – 10V power supply. You can even boost a 3.5V input to 12V if the load draws only 100 mA or less. This switch mode voltage regulator use LTC1266 IC chip from Linear Technology. Here [...]