Free Circuit Diagram

High voltage current sensing/monitoring can be designed using LTC6101 op-amp. The following current sensing circuit is capable of measuring electrical current in 500 volts system. Here is the schematic diagram of the circuit: Two external Mosfets is added to hold off the voltage, allows the LTC6101 to be connected to a very high [...]

A LT1637 is advertised as 1.1MHz, 0.4V/us Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp. This features are suitable for current sensing application since input voltages are right at the upper rail. The circuit show current sensing of 5V supply system, but  monitoring up to 44V application can be done by this circuit  (the maximum [...]

This current sensing circuit sense the current at the high side (between positive supply and load). This circuit take the benefit of the microampere supply current and Rail-to-Rail input of the LT1494 op-amp. Here is the schematic diagram of the circuit: Look at the op-amp, the inverting input is connected directly to the [...]

This is a simple circuit that can be used to convert a 4-20mA signal to a 0V to 5V analog voltage. It is ideal conversion to digital with an analog-to-digital converter (ADC). In this circuit, a current-sense amplifier (IC1) is used to monitor the loop current. To generate a ground-referenced output that ranges from 0V [...]

On the circuit diagram, R1 is used to senses current flow of a power supply. We could use JFET as a buffer because Id=Is, therefore the power supply current flow is accurately reflected by the output monitor. Here’s the circuit diagram: [Source: National Semiconductor Application Note]

This a a simple circuit for precision current sink. This circuit uses two kinds of transistor, 2N2219 bipolar transistor and 2N3069 JFET because both of them have inherently high output impedance. Here is the circuit : To provide feedback to the LM101 op amp, this circuit uses R1 as a current sensing resistor. [...]