Free Circuit Diagram

In the simplest form, current to voltage converter can be implemented as simple as one resistor,  since a voltage is developed when an electrical current flow against a resistance. The problem is that the resistance always affect the current by  decreasing the current flow, and the current to voltage conversion is not accurate. In some [...]

High voltage current sensing/monitoring can be designed using LTC6101 op-amp. The following current sensing circuit is capable of measuring electrical current in 500 volts system. Here is the schematic diagram of the circuit: Two external Mosfets is added to hold off the voltage, allows the LTC6101 to be connected to a very high [...]

This constant current constant voltage  SMPS can be used to efficiently charge a battery. This circuit gives 7.2V at constant voltage mode, and 600 mA at constant current mode. Here is the schematic diagram of the circuit: The mechanism is simple, when the load impedance is high, then the output voltage will be [...]

Designing passive crossover network for your speaker system is easy, just like what shown in our previous crossover design article, but now we can design many types of crossover even easier using online crossover design tool. The crossover schematic diagram here is an example  with a case of 10 kHz high corner frequency, 1250 Hz  [...]

This circuit provide automatic current limiting up to 8.4A. Unlike current limiter that uses only a resistor, this current limiting circuit doesn’t drop the voltage, or at least keep the voltage drop at minimum, until a certain current amount is exceeded. This current amount limit is adjustable from 1.4 A to 8.4A using a [...]

This current sensing circuit sense the current at the high side (between positive supply and load). This circuit take the benefit of the microampere supply current and Rail-to-Rail input of the LT1494 op-amp. Here is the schematic diagram of the circuit: Look at the op-amp, the inverting input is connected directly to the [...]