Free Circuit Diagram

Silicon pezoresitive-bridge pressure transducer (SPPT) is very popular in medical, industrial, environmental, and automotive pressure sensor application. The general architecture of SPPT uses a thin micromachined silicon diaphragm incorporates a implanted piezoresitive Wheatson-bridge strain-gauge. The transducer design allows only a small diaphragm deflection sin it has limited elasticity, and this produces only a very [...]

To obtain an accurate pressure value, we must remove the offset errors. There are  many basic circuit designs that is used to remove the offset errors. This  circuit uses three method to remove the offsets errors, they are symmetrical offset trim, asymmetrical offset trim and amplifier gain adjustment. Here is the circuit: [...]

This is pressure sensor signal conditioning circuit. It is simple and inexpensive circuit because it has small geometry and simple pressure sensor. It just uses a single Operational Amplifier. This circuit obtain power from from 3-V battery. To work properly this circuit must work in  0 C to 50 C temperature range. Here is the [...]

Introduction Interfacing humidity sensor can be difficult because of the sensor’s drive requirement and their wide dynamic range.  We can customize the circuit to obtain reasonable accuracy within the chosen range by carefully selecting the devices that comprise the analog front end. Here  we present a case study to design analog signal conditioner for [...]

For any electrically conductive liquid level measurement, this single chip circuit is very compact and simple. This circuit is an ac excited fluid level sensor, which uses alternating current to provide biasing for the sensor probe to avoid electrolysis of the probes.  This ac excitation makes the sensing probe has longer lifetime. This circuit can [...]

In some temperature-sensing applications there are some problems caused by the placement of sensors on location where the potential is very different from that of the data-acquisition-system common. So the operating temperature sensor must be isolated from its data-acquisition system galvanically.  And the power’s source for the sensor was isolated. This circuit is designed to [...]