Free Circuit Diagram

RJ45 is used to connect Ethernet port on your computer. There are two configuration: straight and cross. Straight RJ45 cables should be used to connect between computer and device such as switch or hub, and cross RJ45 cables should be used in computer-to-computer connection.  Some hub or switch has the capability to detect the cable [...]

Twisted-pair wiring is a wiring technique that usually used for in-building data communication. Compared to conventional coaxial-cable, this technique offers substantial cost saving, for video transmission on the same medium. A differential driver is used to launching a baseband camera signal to twisted pair. Twisted pair exhibits a roll-off characteristic that need equalization to [...]

This circuit enables you to connect your camera with very long wire. The circuit is actually a video amplifiers. At the sender part, the amplifier is used to make a stronger signal. This stronger video signal then can be transmitted through the long cables. The signal is transmitted using balanced mode, where two wires are [...]

This pin diagram will be  useful when viewing these connectors. Sometimes you hold a soldering iron to the back of the connector, and you don’t remember the numbering of the pin. Here is the pin diagram for your reference: The number of each pins are actually  stamped on both sides of any D-type [...]

UHF antenna booster can be used for better reception, especially when you’re far from TV station / relay transmitter. This UHF antenna booster works in 400-850 MHz range. Here is the circuit diagram of the UHF antenna booster: The circuit use only one transistor, but it gives you 10 to 15 dB amplification, [...]

This is a video tutorial about breadboard. This video shows how to make a simple circuit on the breadboard. In this video, the circuit that is build on the breadboard is a simple LED light circuit. It require a LED light, a resistor and two cable. Here is the video : The [...]