Free Circuit Diagram

RJ45 is used to connect Ethernet port on your computer. There are two configuration: straight and cross. Straight RJ45 cables should be used to connect between computer and device such as switch or hub, and cross RJ45 cables should be used in computer-to-computer connection.  Some hub or switch has the capability to detect the cable [...]

This circuit enables you to connect your camera with very long wire. The circuit is actually a video amplifiers. At the sender part, the amplifier is used to make a stronger signal. This stronger video signal then can be transmitted through the long cables. The signal is transmitted using balanced mode, where two wires are [...]

Balanced input has three connections, ground, positive signal, and negative signal. When we trace the signal using oscilloscope, if we take the ground as the reference, then the negative signal and the positive signal has similar shape but with inverted polarity. If we measure the signal between positive and negative output, the we have two [...]

This pin diagram will be  useful when viewing these connectors. Sometimes you hold a soldering iron to the back of the connector, and you don’t remember the numbering of the pin. Here is the pin diagram for your reference: The number of each pins are actually  stamped on both sides of any D-type [...]

RS485 interface gives some more benefits compared to RS232: simplicity and the robustness for long distance transfer. RS485 is simpler because it uses only two wire (or a single pair) to carry out the data in bidirectional manner, using RS232, we need 3 wires at minimum to carry the data bidirectionally. RS485 cable length can [...]

This is a video tutorial about RJ45. This video shows how to punch down an RJ45 keystone jack using a impact tool. The first thing that we gonna do is strip the wire. It is very important because when we connect the wire, it can cause the problem. And then, put the wire on RJ45, [...]