FreeCircuitDiagram Articles Search
Custom Search



Programmable Pressure Transducer Circuit

circuit schematic

Silicon pezoresitive-bridge pressure transducer (SPPT) is very popular in medical, industrial, environmental, and automotive pressure sensor application. The general architecture of SPPT uses a thin micromachined silicon diaphragm incorporates a implanted piezoresitive Wheatson-bridge strain-gauge. The transducer design allows only a small diaphragm deflection sin it has limited elasticity, and this produces only a very [...]



Read the rest of this article [..]

Pressure Sensor Signal Conditioning Circuit with Single Op-Amp

circuit schematic

This is pressure sensor signal conditioning circuit. It is simple and inexpensive circuit because it has small geometry and simple pressure sensor. It just uses a single Operational Amplifier. This circuit obtain power from from 3-V battery. To work properly this circuit must work in  0 C to 50 C temperature range. Here is the [...]



Read the rest of this article [..]

Error Compensation Circuit for Pressure Sensor

circuit schematic

To obtain an accurate pressure value, we must remove the offset errors. There are  many basic circuit designs that is used to remove the offset errors. This  circuit uses three method to remove the offsets errors, they are symmetrical offset trim, asymmetrical offset trim and amplifier gain adjustment. Here is the circuit: [...]



Read the rest of this article [..]

Notch Filter: The Circuit’s Diagram and The Design Formula

circuit schematic

Notch filter is known as band-cut filter or band-reject filter. The fuction of this filter is to remove some frequency portion of a signal. The schematic diagram of this filter circuit, a second order notch filter is depicted in the figure below. The formula is actually complicated, but by taking the R3=R4 and [...]



Read the rest of this article [..]

1st-order-3-Way Crossover Circuit Design Using Free Online Tool

circuit schematic

Designing passive crossover network for your speaker system is easy, just like what shown in our previous crossover design article, but now we can design many types of crossover even easier using online crossover design tool. The crossover schematic diagram here is an example  with a case of 10 kHz high corner frequency, 1250 Hz  [...]



Read the rest of this article [..]

Square Oscillator Using Comparator: The Circuit Schematic Diagram and The Formula

circuit schematic

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]



Read the rest of this article [..]




 Page 1 of 50  1  2  3  4  5 » ...  Last »