Free Circuit Diagram

This is a Colpitts-crystal oscillator circuit. It is suitable for low frequency crystal oscillator circuits. Using the 2N3823 JFET, this circuit has excellent stability because the temperature will not vary the 2N3823 JFET circuit loading. Here is the circuit : [Source: National Semiconductor Application Note]

With very low harmonic distortion, 2N4416 JFET is suitable to smoothly oscillate in a circuit. On application where low harmonic content is required for a good mixer circuit, JFET local oscillator is very good. Below is the circuit diagram of Low Distortion Oscillator: And here’s the 20 MHz Oscillator Values [...]

Op-amps has been widely used in low frequency oscillator (frequency <= 100kHz), but we can actually use it for high frequency crystal oscillator as long as we have an op-amp with the proper bandwidth. An excellent gain stages can be implemented using LT1190 and LT1191 op-amps. Here is the schematic diagram of the circuit: [...]

Metal Detector Circuit Topology One of the simplest method of metal detecting is by beat frequency oscillator. Basically, the circuit consist of two balanced oscillator. One oscillator provides the reference signal, and other oscillator is acting as the detector element. The reference oscillator’s frequency is fix, while the detector oscillator is variable depending on [...]

Bubba oscillator is another example of phase shift oscillator. The Bubba oscillator takes the advantage of quad op-amp package to get 45 degree phase shift for each section. The result is excellent d(phase)/d(t) to get very low frequency drift. Here is the schematic diagram of the circuit: Each RC section give 45 degree [...]

A PLL system can be used to build a frequency-selective frequency multiplier by inserting a frequency divider inside the feedback path between the VCO output and the phase error detector input. Here is the schematic diagram of a low-frequency synthesizer with a programmable three decades divider circuit. The frequency-divider modulus N can vary [...]