Free Circuit Diagram

High voltage current sensing/monitoring can be designed using LTC6101 op-amp. The following current sensing circuit is capable of measuring electrical current in 500 volts system. Here is the schematic diagram of the circuit: Two external Mosfets is added to hold off the voltage, allows the LTC6101 to be connected to a very high [...]

This is a simple circuit that can be used to convert a 4-20mA signal to a 0V to 5V analog voltage. It is ideal conversion to digital with an analog-to-digital converter (ADC). In this circuit, a current-sense amplifier (IC1) is used to monitor the loop current. To generate a ground-referenced output that ranges from 0V [...]

This current sensing circuit sense the current at the high side (between positive supply and load). This circuit take the benefit of the microampere supply current and Rail-to-Rail input of the LT1494 op-amp. Here is the schematic diagram of the circuit: Look at the op-amp, the inverting input is connected directly to the [...]

Current handling capability of a power supply system often needed to be checked. Finding high power rated variable resistor to provide variable load testing might be difficult. There is wire wound type but it’s not always available at your local store, and the price and performance might be disappointing. This variable high power “resistor” uses [...]

A LT1637 is advertised as 1.1MHz, 0.4V/us Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp. This features are suitable for current sensing application since input voltages are right at the upper rail. The circuit show current sensing of 5V supply system, but  monitoring up to 44V application can be done by this circuit  (the maximum [...]