Free Circuit Diagram

High voltage current sensing/monitoring can be designed using LTC6101 op-amp. The following current sensing circuit is capable of measuring electrical current in 500 volts system. Here is the schematic diagram of the circuit: Two external Mosfets is added to hold off the voltage, allows the LTC6101 to be connected to a very high [...]

This voltage-controlled oscillator circuit is very compact and has a good linearity. The author said that the precision could be better than 0.01% If this circuit is properly constructed. Moreover, this circuit gives three different output waveforms: square, triangle, and sawtooth. This three waveform is important for music synthesizer and measurement [...]

Using VFC110 chip, we can build a high frequency voltage-to-frequency converter. The features of this chip include the capability of high frequency operation, disable function, and an on-board precision 5V reference. This precision reference can be used to provide reference for offsetting the VFC transfer function, as well as provide transducer or bridge excitation. As [...]

LM386 is one of my favorite small audio amplifier integrated circuit chip. The LM386 is a power amplifier designed for use in low voltage consumer applications. The inputs are ground referenced while the output automatically biases to one-half the supply voltage. The gain is internally set to 20 to keep external part count low, [...]

Voltage to frequency is very useful in many situation, such as transmitting temperature measurement using standard voice radio transceiver. This circuit (see the circuit’s schematic diagram) uses only two CA3130 op-amps, but the performance is good enough. The linearity of the voltage-frequency transfer is better than 0.5% and the temperature coefficient is lower [...]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]