Free Circuit Diagram

Waveform generator is very useful in electronic experiment and design. This circuit generate sine wave oscillation, but actually we can modify the circuit to generate triangle or square wave function. Lets see its schematic diagram first, here it is: The core of this waveform generator is MAX038. This integrated circuit chip gives complete [...]

Using VFC110 chip, we can build a high frequency voltage-to-frequency converter. The features of this chip include the capability of high frequency operation, disable function, and an on-board precision 5V reference. This precision reference can be used to provide reference for offsetting the VFC transfer function, as well as provide transducer or bridge excitation. As [...]

Op-amps has been widely used in low frequency oscillator (frequency <= 100kHz), but we can actually use it for high frequency crystal oscillator as long as we have an op-amp with the proper bandwidth. An excellent gain stages can be implemented using LT1190 and LT1191 op-amps. Here is the schematic diagram of the circuit: [...]

This is a video tutorial for Function generator. This video explains how to use function generator and how it works. The function generator is used to generate waveform. The waveform that is can be generated by function generator are sinewave, squarewave and trianglewave. Using the function generator we can adjust the frequency, amplitude and DC [...]

Voltage to frequency is very useful in many situation, such as transmitting temperature measurement using standard voice radio transceiver. This circuit (see the circuit’s schematic diagram) uses only two CA3130 op-amps, but the performance is good enough. The linearity of the voltage-frequency transfer is better than 0.5% and the temperature coefficient is lower [...]

The schematic diagram shown in the figure below show a function generator circuit using CA3130 in the integrator the threshold detection sections. Both triangular and square-wave signal are available from this circuit’s output, ranging from 0.1Hz to 100KHz (1:1000000 ratio). This frequency adjustment is done only by a single control R1. A voltage control input [...]