FreeCircuitDiagram Articles Search
Custom Search



USB-RS232 Converter

circuit schematic

Many new computers now only has USB port, and this serial to USB adapter might be the only help for old devices that provides only RS232/COM Port. This serial adapter uses FT232 USB-RS232  converter IC from FTDI (Future Technology Devices International).  The main features of this USB serial adapter chip are: 384 [...]



Read the rest of this article [..]

TTL-RS232 Level Converter Using MAX232 IC

circuit schematic

Using MAX232 integrated circuit, you can build a TTL-to-RS232 level converter that totally comply with RS232 electrical specification. The IC generate the higher positive and negative voltage (+10 and -10 Volts)  from TTL power supply (5V DC) using switched capacitor. The switching circuitry is provided inside the chip, so you need only few caps for [...]



Read the rest of this article [..]

RS232 to RS485 Converter

circuit schematic

RS485 interface gives some more benefits compared to RS232: simplicity and the robustness for long distance transfer. RS485 is simpler because it uses only two wire (or a single pair) to carry out the data in bidirectional manner, using RS232, we need 3 wires at minimum to carry the data bidirectionally. RS485 cable length can [...]



Read the rest of this article [..]

Simple TTL-RS232 Level Converter Using Transistor

circuit schematic

Using only transistors as the active components, we can build a simple and low cost TTL-to-RS232 level converter. It uses only two transistors as the active components. Here is the schematic diagram of the converter: /caption] You can use any small signal transistor for this RS232 converter circuit. You can see [...]



Read the rest of this article [..]

Current to Voltage Converter

circuit schematic

In the simplest form, current to voltage converter can be implemented as simple as one resistor,  since a voltage is developed when an electrical current flow against a resistance. The problem is that the resistance always affect the current by  decreasing the current flow, and the current to voltage conversion is not accurate. In some [...]



Read the rest of this article [..]

Audio Frequency Meter Using 555 IC

circuit schematic

This audio frequency meter uses 555 IC as a monostable multivibrator (one-shoot trigger). A monostable multivibrator can act as a frequency-to-voltage converter because it produce a fixed pulse width, with the repetition rate/density is proportional to the triggering input frequency. Here is the circuit’s schematic diagram: For resistor R1, because it set the [...]



Read the rest of this article [..]




 Page 1 of 17  1  2  3  4  5 » ...  Last »