Free Circuit Diagram

The high durability nature of a light emitting diode (LED) make it suitable for ON/OFF indicator application. Because the limitation on low operating voltage, LEDs are normally applied on low voltage application.  Fortunately, there is a simple method to apply LED indicator for high powerline voltage: reactance of a capacitor can be used to limit [...]

This LED flasher give similar circuit with the previous transistor LED flasher, but this circuit use a 555  integrated circuit chip as the active component. Here is the schematic diagram of the LED flasher circuit: This circuit gives alternating LED flashing, but with different flashing period between LED 1 and LED 2. The [...]

Classic LED Flasher Circuit This LED flasher circuit is a classic two transistor flip flop. This flasher circuit is very popular and it’s usually the first circuit to build when starting electronic circuit building hobby. Here is the schematic diagram of the famous LED flasher circuit: How LED Flasher Circuit Works [...]

LED flasher circuit here will flash a LED using only 1.5 volts  supply voltage. Normally, to make any LED lamp works, you need more than 2 volts power supply. This because LED will work only when the supply voltage is higher than its forward bias voltage, around 2 volts  for red LED, and slightly lower [...]

AN6884 is a logarithmic scale LED bar display driver. AN6884 accept wide range of supply voltage, ranging from 3.5V to 16V. This VU (voltage unit) bar display circuit provides only 5 levels,  but will accept wide range of input level because the scale is logarithmic: -10, -5, 0, 3, and 6dB points. The output current [...]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]