Free Circuit Diagram

This is circuit of soft light dimmer. This circuit uses the IGBT STGP10N50A and the TS555 timer as main components. Here is the circuit: The timer is triggered on the zero crossing voltage pulse. The time constant determined by C5/R14+R15 that is used to determine the conduction angle. The T2 – T3 inhibits [...]

This is a circuit of Temperature-Compensated Capacitive Proximity Detector. it will lights the LED when a person approaches the antenna plate. Here is the circuit : The 4-inch-square antenna plate and a 33pF capacitor (C1) in parallel with 15pF (6 inches of coaxial cable at 30pF per foot)  are used to form delay [...]

To know someone is lying  or not we can use lie detector. This is a simple lie detector that can be made in minutes. It works to detect the someone who telling lie but it is not as sophisticated as the ones the professionals use. Here is the schematic diagram of this circuit: [...]

Fast peak detector requires special amplifier features. The output stage must have high slew rate to keep up with the intermediate stages of the amplifier. This condition causes either a long overload or DC accuracy errors. The amplifier must deliver large currents into the capacitive load of the detector to maintain a high slew rate [...]

You can use this circuit to give auto trigger for your secondary flash light. You don’t have to worry about wiring for the control, because using this circuit your secondary flash will be automati8cally triggered when it receive the light signal from the primary flash. Look at the circuit’s schematic diagram below. The [...]

The circuit below is a schematic diagram of a fast pulse detector. At 100 ns  or wider pulse width, the detection should be error free. At 60 ns pulse width,  the detection error should be under 10%. This circuit should be used to detect at least 100 ns wide pulse to ensure an [...]