Free Circuit Diagram

Silicon pezoresitive-bridge pressure transducer (SPPT) is very popular in medical, industrial, environmental, and automotive pressure sensor application. The general architecture of SPPT uses a thin micromachined silicon diaphragm incorporates a implanted piezoresitive Wheatson-bridge strain-gauge. The transducer design allows only a small diaphragm deflection sin it has limited elasticity, and this produces only a very [...]

To obtain an accurate pressure value, we must remove the offset errors. There are  many basic circuit designs that is used to remove the offset errors. This  circuit uses three method to remove the offsets errors, they are symmetrical offset trim, asymmetrical offset trim and amplifier gain adjustment. Here is the circuit: [...]

This is pressure sensor signal conditioning circuit. It is simple and inexpensive circuit because it has small geometry and simple pressure sensor. It just uses a single Operational Amplifier. This circuit obtain power from from 3-V battery. To work properly this circuit must work in  0 C to 50 C temperature range. Here is the [...]

The schematic diagram below show a complete barometric pressure signal conditioner that operates from a single 1.5V battery. We can get the best accuracy and stability if we use bonded strain gauge and capacitive-based transducer,  but they are expensive.  This design introduce a new type of semiconductor transducer that achieves 0.01″ Hg (inches of mercury) [...]

Using VFC110 chip, we can build a high frequency voltage-to-frequency converter. The features of this chip include the capability of high frequency operation, disable function, and an on-board precision 5V reference. This precision reference can be used to provide reference for offsetting the VFC transfer function, as well as provide transducer or bridge excitation. As [...]

XTR105 is a 4-20mA current loop transmitter integrated circuit, with two precision current sources. The Instrumentation amplifier gain inside this chip can be configured for a wide range of temperature or pressure measurements. This integrated circuit chip provides current excitation for platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a [...]