
One of the interesting features of CA3130 op-amp is its high input resistance, because using such high input resistance, we can build an astable multivibrator with high R/C ratios. The figure below shows the circuit’s schematic diagram, you can see the variable resistors to adjust the “on” and “off” periods independently. Resistors R1and [...]
Read the rest of this article [..]

Pulse position modulator can be easily built using 555 IC. Here is the schematic diagram of the circuit: Pulse position modulator modulate the on-period while keeping the fixed off-period. Pulse position modulation might substitute pulse-width modulation in some application. The main difference between pulse position modulation (PPM) and pulse width modulation (PWM) is [...]
Read the rest of this article [..]

The circuit below is a schematic diagram of a fast pulse detector. At 100 ns or wider pulse width, the detection should be error free. At 60 ns pulse width, the detection error should be under 10%. This circuit should be used to detect at least 100 ns wide pulse to ensure an [...]
Read the rest of this article [..]

Notch filter is known as band-cut filter or band-reject filter. The fuction of this filter is to remove some frequency portion of a signal. The schematic diagram of this filter circuit, a second order notch filter is depicted in the figure below. The formula is actually complicated, but by taking the R3=R4 and [...]
Read the rest of this article [..]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single [...]
Read the rest of this article [..]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]
Read the rest of this article [..]