
Silicon pezoresitive-bridge pressure transducer (SPPT) is very popular in medical, industrial, environmental, and automotive pressure sensor application. The general architecture of SPPT uses a thin micromachined silicon diaphragm incorporates a implanted piezoresitive Wheatson-bridge strain-gauge. The transducer design allows only a small diaphragm deflection sin it has limited elasticity, and this produces only a very [...]
Read the rest of this article [..]

Photovoltaic transducers has been widely used in medical, consumer, scientific instrumentation, and industrial applications. Photovoltaic sensors is a solid-state devices and available for wide range of wavelength response, cover from infrared, visible, and ultraviolet spectrum. This characteristic make this type of transducer applicable in diverse jobs such as colorimetry, chemical spectral analysis, non-contact thermometry, non-invasive [...]
Read the rest of this article [..]

Transducers is used in video system to convert optical signal to electrical signal in the acquisition. In the display, transducer is used to convert electrical signal back to light. Transducers often have a transfer function (the ratio of signal in to light out) that is unacceptably nonlinear. The newer technology of [...]
Read the rest of this article [..]

This is JFET sample and hold circuit. In this circuit, the logic voltage is applied simultaneously to the sample and hold JFETs. Here is the circuit : The errors due to rds(on) of the JFETs can be minimized by matching feedback capacitance and resistance and input impedance. The circuit performance is greatly improved [...]
Read the rest of this article [..]

Fluorescent lamp or tube lamp (TL) has good efficiency. This high efficiency feature make it suitable for battery operated lighting application. To drive the tube lamp, we need high voltage to make the gas inside the tube get ionized. Here is the schematic diagram of the fluorescent lamp circuit: To trigger the ionizing [...]
Read the rest of this article [..]

Light dimmer circuit is used to control the lamp for arbitrary brightness. This dimmer circuit work for incandescent lamp, not a fluorescent one. The dimmer circuit here work for both 110V and 220V AC. Here is the schematic diagram of the circuit: /caption] Dimmer Wiring Diagram The dimmer circuit is [...]
Read the rest of this article [..]