Free Circuit Diagram

This is a protocol translator circuit. This circuit uses the MAX3162, it contains both  RS-485 and RS-232 transmitters  and receivers. This IC contains wide range of communication devices, that can convert bidirectionally between RS-485 and RS-232 signals. Here is the circuit : The upper circuit is the translator for point to point [...]

This pin diagram will be  useful when viewing these connectors. Sometimes you hold a soldering iron to the back of the connector, and you don’t remember the numbering of the pin. Here is the pin diagram for your reference: The number of each pins are actually  stamped on both sides of any D-type [...]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]

Notch filter is known as band-cut filter or band-reject filter. The fuction of this filter is to remove some frequency portion of a signal. The schematic diagram of this filter circuit, a second order notch filter is depicted in the figure below. The formula is actually complicated, but by taking the R3=R4 and [...]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]

This circuit is similar to our previous tone control circuit, a bass-treble tone control circuit, but here we present the formula for design your tone control’s custom frequency response. Here is the schematic diagram and formula of the tone control circuit: Almost all op-amp type can be used, as long as they have [...]