FreeCircuitDiagram Articles Search
Custom Search



Square Oscillator Using Comparator: The Circuit Schematic Diagram and The Formula

circuit schematic

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]



Read the rest of this article [..]

Wien Bridge Oscillator: The Circuit Schematic Diagram and The Design Formula

circuit schematic

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]



Read the rest of this article [..]

First Order Low-Pass Active Filter: The Circuit Schematic Diagram and The Design Formula

circuit schematic

The simple low-pass filter is shown in Figure below. The filter has a 20dB/decade roll-off after its corner frequency fc. Its low-pass frequency gain (f->0) is defined by R3/R1. This allows low-frequency gains other than unity to be obtained.  R2 should be chosen equal to the parallel combination of R1 and R3 to minimize error [...]



Read the rest of this article [..]

Baxandall Tone Control Using LM833: The Circuit’s Schematic Diagram and The Formula

circuit schematic

This circuit is similar to our previous tone control circuit, a bass-treble tone control circuit, but here we present the formula for design your tone control’s custom frequency response. Here is the schematic diagram and formula of the tone control circuit: Almost all op-amp type can be used, as long as they have [...]



Read the rest of this article [..]

AC Powered-LED Circuit

circuit schematic

The high durability nature of a light emitting diode (LED) make it suitable for ON/OFF indicator application. Because the limitation on low operating voltage, LEDs are normally applied on low voltage application.  Fortunately, there is a simple method to apply LED indicator for high powerline voltage: reactance of a capacitor can be used to limit [...]



Read the rest of this article [..]

LED Flasher Circuit Using Transistors

circuit schematic

Classic LED Flasher Circuit This LED flasher circuit is a classic two transistor flip flop. This flasher circuit is very popular and it’s usually the first circuit to build when starting electronic circuit building hobby. Here is the schematic diagram of the famous LED flasher circuit: How LED Flasher Circuit Works [...]



Read the rest of this article [..]




 Page 1 of 51  1  2  3  4  5 » ...  Last »