Free Circuit Diagram

This radio modem is popular for amateur radio packet application. This radio modem is powered by the data and control lines, so it need no additional power supply. Just plug to your standard RS232 port and this modem will work. As seen in our previous modem circuit, this radio modem circuit also uses TCM3105 modem [...]

TDA 1072AT is a special purpose integrated circuit for AM radio receiver from Philips Semiconductors. The integrated circuit is designed for mains-fed home receivers and car radios. The voltage-controlled oscillator provides signals with extremely low distortion and high spectral purity over the whole frequency range even when tuning with variable capacitance diodes. RF radiation and [...]

Metal Detector Circuit Topology One of the simplest method of metal detecting is by beat frequency oscillator. Basically, the circuit consist of two balanced oscillator. One oscillator provides the reference signal, and other oscillator is acting as the detector element. The reference oscillator’s frequency is fix, while the detector oscillator is variable depending on [...]

This PWM  circuit needs only two inverter gates, so you can build up to 3 independent PWM circuit using only one IC chip, since there are at keast 6 inverter gates in one IC package. Here is the schematic diagram of the circuit: Please remember that you should connect any input pins of [...]

This video tutorial  is about servo motor that controlled by PWM signal.  There should be two electrical input, one for the power and  another for the control signal (to command a position). This servo motor is very common that can be found in the radio control cars and airplanes. The position of  the servo motor [...]

You can use a humidity sensor to give an alert of boat leakage, or when your books start being flooded by heavy rain attack on your broken roof, or anything you can imagine. A simple humidity sensor (a humidity probe) can be constructed using two copper wires placed as close as possible to each other, [...]