Free Circuit Diagram

We  can make a simple touch switch using only two inverter gates, two resistors, and two capacitors. The schematic diagram of the circuit is shown in the figure below. At power up, the output (of U1A) will be high, and the inverting output will be low because U1A gate will be triggered to ground level [...]

Many efforts has been made to make simpler circuit, and here is one result, a very simple touch switch.  You can build up to 6 similar circuit using only one 4050 chip. If you touch the “on” pad, the output will be on on remains on until you or some one the “off” pad. Here [...]

Our reader Andrea (andrea[dot]perugia[-at-]gmail[dot] com) sent his circuit to us, and he creates the circuit for educational intent. The main purpose is to show that you can toggle an output state electronically, although physically you use only a push button switch. Here is what he said about the cicuit : This simple [...]

This 555 circuit will activate a buzzer and turn on a LED lamp when you touch the probe. Here is the circuit’s schematic diagram: lf you touch the plates, the lamp and the buzzer will be activated for a predetermined time period. The time period is determined by 100k resistor and the 10uF [...]

You can use a humidity sensor to give an alert of boat leakage, or when your books start being flooded by heavy rain attack on your broken roof, or anything you can imagine. A simple humidity sensor (a humidity probe) can be constructed using two copper wires placed as close as possible to each other, [...]

If you need a negative supply for op-amp or just need negative bias voltage while operating from a single supply voltage (for battery operation for example), this circuit helps providing the negative supply for you. The circuit is based on charge pump driven by 555 switching circuit. Here is the schematic diagram: [...]