FreeCircuitDiagram Articles Search
Custom Search



Sine Wave Oscillator Circuit Using Phase Shifter

circuit schematic

Sine wave oscillator can be implemented using Wien-Bridge oscillator like in our previous sine wave oscillator circuit, but now we present another method of generating sine wave signal. Using phase shifter, we can build a simple sine wave generator, as shown in the schematic diagram below: Sine wave oscillator using phase shifter has [...]



Read the rest of this article [..]

Function Generator Using CA3080 and CA3130 Op-Amps

circuit schematic

The schematic diagram shown in the figure below show a function generator circuit using CA3130 in the integrator the threshold detection sections. Both triangular and square-wave signal are available from this circuit’s output, ranging from 0.1Hz to 100KHz (1:1000000 ratio). This frequency adjustment is done only by a single control R1. A voltage control input [...]



Read the rest of this article [..]

Single Supply Precise Full Wave Rectifier Using CA3140 Op-Amp

circuit schematic

The schematic diagram below describe a precise full-wave rectifier circuit. The circuit needs only a single supply, make it suitable for battery operated devices. During the positive cycle of the input, the signal is directly fed through the feedback network to the output, give the transfer function of Vout=R3/(R1+R2+R3). At the positive cycle [...]



Read the rest of this article [..]

Pulse Generator (Oscillator) With Adjustable On-Off Period Using CA3130 Op-Amp

circuit schematic

One of the interesting features of CA3130 op-amp  is its high input resistance, because using such high  input resistance, we can build an astable multivibrator with high R/C ratios. The figure below shows the circuit’s schematic diagram, you can see the variable resistors to adjust the “on” and “off” periods independently. Resistors R1and [...]



Read the rest of this article [..]

Current Amplifier Using CA3140 Op-Amp

circuit schematic

Current amplifier application need very low input bias current, and CA3140 is one of suitable op-amps for this purpose. The circuit’s schematic diagram is shown in the figure below. In the circuit, low current is supplied at the input potential as the power supply to load resistor RL. When the load current is [...]



Read the rest of this article [..]

Baxandall Tone Control Using CA3140 Op-Amp

circuit schematic

Operational amplifiers for tone control circuit application require high slew rate, wide bandwidth, high input impedance, and high output current characteristics, and CA3140 is suitable for this purpose. Look at the following tone control circuit’s schematic diagram for the design. The tone control circuit in the figure above use a very popular Baxandall [...]



Read the rest of this article [..]




 Page 1 of 51  1  2  3  4  5 » ...  Last »