Free Circuit Diagram

RJ45 is used to connect Ethernet port on your computer. There are two configuration: straight and cross. Straight RJ45 cables should be used to connect between computer and device such as switch or hub, and cross RJ45 cables should be used in computer-to-computer connection.  Some hub or switch has the capability to detect the cable [...]

This is a video tutorial about RJ45. This video shows how to punch down an RJ45 keystone jack using a impact tool. The first thing that we gonna do is strip the wire. It is very important because when we connect the wire, it can cause the problem. And then, put the wire on RJ45, [...]

This circuit is a simple crystal oscillator that can be operated in overtone mode. Overtone mode permit the operation at higher frequency than specified by the crystal. The circuit uses a grounded base amplifier configuration, and place the crystal as a series resonator. The transistor Q1 is biased in the active region as [...]

This pin diagram will be  useful when viewing these connectors. Sometimes you hold a soldering iron to the back of the connector, and you don’t remember the numbering of the pin. Here is the pin diagram for your reference: The number of each pins are actually  stamped on both sides of any D-type [...]

This switch mode regulator circuit has higher current output than  our previous switch mode regulator, but it uses same controller IC. Up to 10A can be served by this switch mode regulator. The output of this regulator circuit is regulated at 3.3 volt, and the input range is 4-9Volt. The SHDN pin can [...]

The configuration in the circuit diagram below can be used when a slow rise time of the output voltage is required. We can find the rise time with following formula: ton= CVoR 0.45 Capacitor C is discharged when the switch position is ON and this will maintain the voltage [...]