Free Circuit Diagram

This LED flasher give similar circuit with the previous transistor LED flasher, but this circuit use a 555  integrated circuit chip as the active component. Here is the schematic diagram of the LED flasher circuit: This circuit gives alternating LED flashing, but with different flashing period between LED 1 and LED 2. The [...]

You can use this circuit to give auto trigger for your secondary flash light. You don’t have to worry about wiring for the control, because using this circuit your secondary flash will be automati8cally triggered when it receive the light signal from the primary flash. Look at the circuit’s schematic diagram below. The [...]

Classic LED Flasher Circuit This LED flasher circuit is a classic two transistor flip flop. This flasher circuit is very popular and it’s usually the first circuit to build when starting electronic circuit building hobby. Here is the schematic diagram of the famous LED flasher circuit: How LED Flasher Circuit Works [...]

LED flasher circuit here will flash a LED using only 1.5 volts  supply voltage. Normally, to make any LED lamp works, you need more than 2 volts power supply. This because LED will work only when the supply voltage is higher than its forward bias voltage, around 2 volts  for red LED, and slightly lower [...]

Using a standard fluorescent tube lamp (TL), you can make your own disco light, similar to a stroboscope light. You can even use a half-broken lamp, which one side of the heating filaments has broken. This circuit use only one side heating filament inside the tube. Look at the circuit’s schematic below. [...]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]