FreeCircuitDiagram Articles Search
Custom Search



Constant Current Constant Voltage SMPS (Switch Mode Power Supply)

circuit schematic

This constant current constant voltageĀ  SMPS can be used to efficiently charge a battery. This circuit gives 7.2V at constant voltage mode, and 600 mA at constant current mode. Here is the schematic diagram of the circuit: The mechanism is simple, when the load impedance is high, then the output voltage will be [...]



Read the rest of this article [..]

Variable Power Supply Using Switching Regulator

circuit schematic

If you are a hobbyist or a professional electronic engineer who make many electronic e]experiment, troubleshooting, or testing, providing wide range variable voltage power supply in your lab or workshop will make your life easier. You can build your variable power supply using linear adjustable regulator, but switching technology let you design a very wide [...]



Read the rest of this article [..]

Transformerless, Switch Mode Boost Regulator, A Step-Up Converter

circuit schematic

Using this switch mode regulator circuit, you can get a stable 12 volt output (500mA) although you just have 4,3 – 10V power supply. You can even boost a 3.5V input to 12V if the load draws only 100 mA or less. This switch mode voltage regulator use LTC1266 IC chip from Linear Technology. Here [...]



Read the rest of this article [..]

Switch Mode Lead Acid Battery Charger

circuit schematic

More efficient lead acid battery charger can be implemented using switch mode circuit. A switch mode for lead acid battery charger can be constructed using bq24105 battery charger controller. The bq24105 was originally designed to charge single-, two- or three-cell Li-ion and Li-polymer battery packs. Its features doesn’t include the control for lead acid battery [...]



Read the rest of this article [..]

Basic Uninterruptible Power Supply Circuit

circuit schematic

Basic interruptible Power Supply Circuit consist of regular power supply adapter and battery connection. This basic system is a “hot” battery connection, meaning that there is no switching mechanism in connecting and disconnecting the battery, the battery is always connected! This hot connection is very simple to implement and very robust because there would [...]



Read the rest of this article [..]

High Efficiency Switch Mode 3.3A 10A Regulator

circuit schematic

This switch mode regulator circuit has higher current output thanĀ  our previous switch mode regulator, but it uses same controller IC. Up to 10A can be served by this switch mode regulator. The output of this regulator circuit is regulated at 3.3 volt, and the input range is 4-9Volt. The SHDN pin can [...]



Read the rest of this article [..]




 Page 1 of 51  1  2  3  4  5 » ...  Last »