Free Circuit Diagram

We  can make a simple touch switch using only two inverter gates, two resistors, and two capacitors. The schematic diagram of the circuit is shown in the figure below. At power up, the output (of U1A) will be high, and the inverting output will be low because U1A gate will be triggered to ground level [...]

This is a FM Transmitter circuit. This circuit uses logic gates. This transmitter circuit has a RF oscillator. This oscillator uses 10.7Mhz ceramic filter and inverter N2 to drive the parallel combination of N4 to N6 through N3. Here is the circuit: The output impedance will be low because these inverters are [...]

For you who has failed to build  radio transmitters, this circuit worth a try. This circuit uses 74HC14 hex Schmidt trigger as the oscillator, and you can choose to use capacitor for low cost goal or quartz  crystal for better stability. For quartz crystal, you can choose any frequency between 00.7-1.6MHz, but around 1.6MHz is [...]

This is a video tutorial of logic probe or logic analyzer. This video shows what is logic probe and how can the logic probe analyzes. There are two main operation in the logic probe work, first is timing analyze and second is state analysis. In this video also shows the different between them. Beside [...]

This is a simple circuit for negative to positive supply logic level shifter. This circuit used to shift the logic level from minus to ground (such as MOS) to any logic level and from a plus to ground supply (such as TTL). Here is the circuit: This circuit uses the 2N3970 that provide [...]

This PWM  circuit needs only two inverter gates, so you can build up to 3 independent PWM circuit using only one IC chip, since there are at keast 6 inverter gates in one IC package. Here is the schematic diagram of the circuit: Please remember that you should connect any input pins of [...]