Free Circuit Diagram

Many new computers now only has USB port, and this serial to USB adapter might be the only help for old devices that provides only RS232/COM Port. This serial adapter uses FT232 USB-RS232  converter IC from FTDI (Future Technology Devices International).  The main features of this USB serial adapter chip are: 384 [...]

RS485 interface gives some more benefits compared to RS232: simplicity and the robustness for long distance transfer. RS485 is simpler because it uses only two wire (or a single pair) to carry out the data in bidirectional manner, using RS232, we need 3 wires at minimum to carry the data bidirectionally. RS485 cable length can [...]

In the simplest form, current to voltage converter can be implemented as simple as one resistor,  since a voltage is developed when an electrical current flow against a resistance. The problem is that the resistance always affect the current by  decreasing the current flow, and the current to voltage conversion is not accurate. In some [...]

Using a single supply quad comparator LM339, LM239, LM2901, LM2901V, NCV2901, or MC3302, we can build a square-wave oscillator with simple circuit and formula. Here is the schematic diagram: This circuit is suitable if you need  many square-wave oscillators in one circuit, since the quad packaged comparator provide four comparators in one single  [...]

The excellent high input impedance, high slew rate, and high voltage qualities of CA3140 op-amp make it suitable for Wien-bridge sine wave oscillator. The basic circuit for Wien-bridge sine wave oscillator is shown in the figure below (the upper part). You can see the formula in the figure, when R1=R2=R, and C1=C2=C, then the formula [...]

This circuit is similar to our previous tone control circuit, a bass-treble tone control circuit, but here we present the formula for design your tone control’s custom frequency response. Here is the schematic diagram and formula of the tone control circuit: Almost all op-amp type can be used, as long as they have [...]