
To obtain an accurate pressure value, we must remove the offset errors. There are many basic circuit designs that is used to remove the offset errors. This circuit uses three method to remove the offsets errors, they are symmetrical offset trim, asymmetrical offset trim and amplifier gain adjustment. Here is the circuit: [...]
Read the rest of this article [..]

Fading a video signal is not as simple as attenuating the whole signal, since there will be a point where the sync amplitude becomes too small. Not only the fading effect, but you’ll get also a rolling and tearing picture if you do this. One solution for this can be as complex as running a [...]
Read the rest of this article [..]

For any electrically conductive liquid level measurement, this single chip circuit is very compact and simple. This circuit is an ac excited fluid level sensor, which uses alternating current to provide biasing for the sensor probe to avoid electrolysis of the probes. This ac excitation makes the sensing probe has longer lifetime. This circuit can [...]
Read the rest of this article [..]

This is pressure sensor signal conditioning circuit. It is simple and inexpensive circuit because it has small geometry and simple pressure sensor. It just uses a single Operational Amplifier. This circuit obtain power from from 3-V battery. To work properly this circuit must work in 0 C to 50 C temperature range. Here is the [...]
Read the rest of this article [..]

Introduction Interfacing humidity sensor can be difficult because of the sensor’s drive requirement and their wide dynamic range. We can customize the circuit to obtain reasonable accuracy within the chosen range by carefully selecting the devices that comprise the analog front end. Here we present a case study to design analog signal conditioner for [...]
Read the rest of this article [..]

A modulated current is provided by the integrated rotational speed sensor KMI 15/x. This current signal must be converted to ground referenced voltage signal, matching the logic levels of the processing unit for digital signal processing. This signal conditioning can be done by using this circuit. This circuit consist of protective elements to suppress line [...]
Read the rest of this article [..]