10.7-MHz IF amplifier

This is 10.7-MHz IF amplifier circuit. This circuit is used in many application such as cell phone base station receivers (final IF) and FM broadcast receivers. The ceramic filter that is used in this circuit are cheap and available in a variety of insertion losses and banwidths. This circuit uses a 230-kHz bandwidth filter SFELA10M7GA00-B0 and the gain stage. Here […]

Read more

Signal Conditioning Amplifier for Piezofilm Sensor

The signal can be converted by piezoelectric films in many ways such as thermal to electrical (temperature sensor), mechanical to electrical (microphone), and electrical to mechanical ( a loudspeaker). The circuit is signal conditioning amplifier for piezofilm sensor which use three op amps and has a high-input-impedance differential charge. Here is the circuit : This circuit use a voltage  source  […]

Read more

TSH22 Audio Line Driver

This is an audio line driver circuit using a TSH22. The advantages of this circuit are low distortion, exhibits a wide bandwidth and an output current sufficient to drive medium impedance loads at a high level modulation. Here is the circuit : This circuit uses two TSH22 that is used in non inverting mode. The gain of this cricuit can […]

Read more

High Impedance Low Capacitance Buffer/Amplifier

These are circuits of high impedance low capacitance buffer and high impedance low capacitance  amplifier. First figure is a high impedance low capacitance buffer circuit, it uses the 2N446 JFET that features low input capacitance. The feedback buffer a wide-band unity gain amplifier is made from this 2N446 JFET. Here is the circuit : The second figure is high impedance […]

Read more

Programmable Pressure Transducer Circuit

Silicon pezoresitive-bridge pressure transducer (SPPT) is very popular in medical, industrial, environmental, and automotive pressure sensor application. The general architecture of SPPT uses a thin micromachined silicon diaphragm incorporates a implanted piezoresitive Wheatson-bridge strain-gauge. The transducer design allows only a small diaphragm deflection sin it has limited elasticity, and this produces only a very small output signal, only about 1% […]

Read more

Programmable Photovoltaic Transimpedance Circuit

Photovoltaic transducers has been widely used in medical, consumer, scientific instrumentation, and industrial applications. Photovoltaic sensors is a solid-state devices and available for wide range of wavelength response, cover from infrared, visible, and ultraviolet spectrum. This characteristic make this type of transducer applicable in diverse jobs such as colorimetry, chemical spectral analysis, non-contact thermometry, non-invasive blood-gas monitoring, and flame detection. […]

Read more
1 3 4 5 6 7