Category: Video Tutorial

This video tutorial is about gerber files. This video shows how to create and edit the gerber files. Before edit the gerber file, make sure that the PCB layout is correct. After that, make gerber file by selecting file the fabrication outputs then select gerber files. In Gerber setup we can edit the general, layouts, and drill drawing. In general […]

This is custom components  creation video tutorial. This video shows step by step how to create the custom component. To create schematic library, click file then new library and select schematic library. After that edit the library component properties, then edit the component pin. Here is the video:

This is component placement video tutorial. In this video tutorial, how to place the component is described. To place component to the PCB, the component can be dragged into work place. The component can be rotated on workplace. Each component should close each another, so the size of PCB can be reduced. Here is the video:

This is attach footprint video tutorial. This video describe about how to attach footprint. To attach footprint, select the component then edit the footprint of component. We can add the custom footprint into the component. Here is the video tutorial:

This is a video about remove solder using solder wick. This video shows step by step how to use a solder wick to remove solder. Put the solder wick to the solder are that want to be removed. Then heat it up. The solder wick will suck the solder like a sponge. Here is the video:

This is how to solder a capacitor to a circuit board video tutorial. This video shows step by step how to solder a capacitor to a circuit board. The positive leg capacitor is longer one. Put the capacitor on the holes of the board and cut the lead of the component. After that, solder the capacitor using soldering iron. Here […]

This is video about how to pretune a ham radio antenna. This video shows how to tune a ham radio. In this video, the antenna is tuned to make sure that the radio can have optimum performance. So the radio can get contacts from the ham radio. First, the lower frequency is tuned. Then tune the top band of the […]