RCV420 is a special function integrated circuit chip for 4-20mA current loop receiver. RCV420 provide complete 4-20mA to 0-5V conversion, with 0.1% overall accuracy, 86dB CMR, and ±40V common-mode input range. This IC chip is suitable for many applications:
- PROCESS CONTROL
- INDUSTRIAL CONTROL
- FACTORY AUTOMATION
- DATA ACQUISITION
- SCADA
- RTUs
- ESD
- MACHINE MONITORING
Here is the schematic diagram of the basic 4-20mA current loop receiver circuit using RCV420 ic chip:m
At full scale, the circuit cause only a 1.5V drop by its internal sense resistance, which is useful in loops containing extra instrument burdens or in intrinsically safe applications where transmitter compliance voltage is at a premium. The 10V reference provides a precise 10V output with a typical drift of 5ppm/°C, might be very useful for analog-to-digital conversion of the output. [Circuit's schematic diagram source: Texas Instruments Application Notes]
Possibly Related Articles:
- Single Chip Thermocouple 4-20mA Current Loop Transmiter Circuit
Thermocouples give many benefits compared to thermistor/RTD (Resistance Temperature Devices). Some advantages of thermocouple are their wider temperature range, their reliability, and their consistency over long period of time. In... - Pt100 RTD Current Loop Transmitter Using XTR105
XTR105 is a 4-20mA current loop transmitter integrated circuit, with two precision current sources. The Instrumentation amplifier gain inside this chip can be configured for a wide range of temperature... - Current Loop Transmitter For Temperature Sensor
Current loop interface has been widely used in industrial environment because it's robustness. Noise resistance and fail detection capability made it suitable for long distant transmission in harsh environment. This... - Single Chip Single Supply Instrumentation Amplifier
The AD623 is a single chip instrumentation amplifier. The internal circuit is based on a modified classic three op amp approach to assure single or dual supply operation even at... - Autonomous Fast NiMH Battery Charger Using Single Chip IC
This simple Batteries charger circuit is designed for NiMH/NiCd batteries. It need no micro-controller nor any programming. Linear Technology Corporation produce the LTC4060, an autonomous 1- to 4-cell, 0.4A to...
| DESIGN BY 