Please be warned if operating this circuit might violate the regulation of your country, because this FM transmitter circuit radiate strong radio frequency to the environment. This wireless microphone is very sensitive, pick up every sound in the 20m radius, and transmit the radio signal up to 2 kilometers in open air. Here is the schematic diagram of the circuit:
The first transistor (Q1) is the pre-amplifier for the microphone, and you can ommit this circuit if you don’t want to transmit the sound picked up by the mic, for example you can can connect your mp3 player directly to C1. The core of this FM transmitter circuit is Q2, a modified Collpits oscillator that the frequency is determined by L1, C4, C6, and the transistor’s internal base-emitter capacitance. The antenna use 1/16 wave length to compromize between the efficiency and the size. If you want the microphone to be less sensitive, you can replace the R1 by a higher resistor, try 10k or 22k, and this might overcome the feedback problem if you use this wireless microphone FM transmitter for a public address system.
Possibly Related Articles:
- Simple 9V Wireless Microphone FM Transmitter
This FM transmitter circuit can be used as a wireless microphone, can be received by an ordinary 88- to 108-MHz FM broadcast receiver. For the power supply, this transmitter circuit... - Single Transistor Wireless Microphone (FM Transmitter)
This wireless microphone circuit uses only a single transistor, with few additional passive components. This FM transmitter is very compact and need only a single cell 1.5Volt battery, even works... - 2 Transistors Mini MW Transmitter
This is a Mini MW (Medium Wave) Transmitter circuit. This circuit consist of combination of transistors SA103 and SA101. Those transistors is used as oscillator and modulation signal amplifier. Here... - FM Transmitter Using Logic Gates
This is a FM Transmitter circuit. This circuit uses logic gates. This transmitter circuit has a RF oscillator. This oscillator uses 10.7Mhz ceramic filter and inverter N2 to drive the... - Another Small Single Chip FM Transmitter
This FM transmitter circuit is small, similar to our previous single chip FM transmitter, but this FM transmitter is monophonic. You can see in the circuit’s schematic, the left and... - Single Chip Stereo FM Transmitter Circuit: A Very Compact Design
ROHM (www.rohm.com) is originally a resistor producer company, but finally expand their business and produce monolithic IC, and this one used in our circuit is the example. The internal structure... - Development Kit for Wireless Sensor – Video Tutorial
The wireless technology is developed well today’s. This video is about the wireless sensor development kit. This video explains the wireless sensor from jennic, jennic 5139. This module include microcontroller,... - Small AM Transmitter Circuit: Using Logic Gates!
For you who has failed to build radio transmitters, this circuit worth a try. This circuit uses 74HC14 hex Schmidt trigger as the oscillator, and you can choose to use... - Low Noise Microphone Pre-Amp with Op-Amp
Microphone pre-amp is a very simple circuit, most all low noise op-amp will be sufficient for this circuit (TL071, TL082, OPA371, NE5534, etc). This circuit will be suitable for dynamic... - How Condenser Microphone Works
A condenser microphone is different from dynamic microphone. The condenser microphone, the diaphragm is assembled close to a rigid backplate. This microphone need a battery that is connected to the... - How Dynamic Microphone Works
A dynamic microphone is an example of dynamic transducer. The principle of dynamic transducer is a movement of a thin metallic diaphragm because of sound wave. This diaphragm attach coil... - Discrete 9-12V Microphone Pre-Amplifier
This is a microphone pre-amplifier circuit that use discrete components. The gain of this circuit is 100 and should be enough for most microphones. It is set by the ratio...
| 
