To produce a pre-amplifier with accurate RIAA response, this circuit use two stages of amplifier. This circuit is more complex than single op-amp RIAA pre-amp, but the performance is excellent in terms of accurate frequency response. Here is the schematic diagram of the circuit.
The circuit uses LM833 high performance op-amp from National Semiconductor, giving the best performace of 0.1 dB response curve error, compared to the standard RIAA curve. [Circuit's schematic diagram source: National Semiconductor Application Notes]
Possibly Related Articles:
- Gramophone Pre-Amp: A Pre-Amplifier with RIAA Response Curve
Recording Industry Association of Ameria (RIAA) has developed the recording standard of response curve for their recording. This curve is developed to optimize the gramophone recording response for lowest signal-to-noise... - Voltage-Current(V/I) Curve Tracer
Voltage-Current curve tracer is very important tools for components ant circuits troubleshooting. This circuit need an oscilloscope with X-Y inputs to display the curve. This circuit provide adjustment for both... - Current Amplifier Using CA3140 Op-Amp
Current amplifier application need very low input bias current, and CA3140 is one of suitable op-amps for this purpose. The circuit's schematic diagram is shown in the figure below. In... - Battery Powered Electret Microphone Pre-Amplifier
Here is a schematic diagram of electret microphone pre-amplifier using LMV721 op-amp. because the LMV721 has low noise and low power features, it would be an ideal choice for battery... - Single Transistor Microphone Pre-Amplifier for Both Dynamic and Condenser Type Mics
Condenser microphone and dynamic microphone (moving coil microphone) has different characteristics. For dynamic mics, a biasing current is not needed because the transducer generate the electrical signal. In condenser mics,...
| DESIGN BY 