Sine wave oscillator can be implemented using Wien-Bridge oscillator like in our previous sine wave oscillator circuit, but now we present another method of generating sine wave signal. Using phase shifter, we can build a simple sine wave generator, as shown in the schematic diagram below:
Sine wave oscillator using phase shifter has lower distortion than Wien-Bridge oscillator, coupled with good frequency stability. The drawback is that the phase shift sine wave oscillator neeed more components (resistor and capacitors). [Source: Texas Instruments Literature]
Possibly Related Articles:
- Sawtooth Wave Oscillator
Sawtooth wave oscillator is used in cathode ray tube deflection circuitry, in a PWM modulator, or in a analog to digital conversion. You can also use it in your own... - Sawtooth Wave Oscillator Using 555 IC
Sawtooth wave oscillator circuit can be implemented using several methods, here we present one design that employs 555 IC. Here is the schematic diagram of the circuit: The core of... - PLL Oscillator for Medium Wave Application
PLL oscillator is used to get very stable frequency woth very low distortion of sine wave output. The stability is equal to crystal-based oscillator, and the low distortion level of... - Square Wave Oscillator with Minimum Components Count
This circuit generates a square-wave which is useful as a clock signal or AC drive for the excitation of sensors. this article presents a square-wave oscillator. This circuit requires no... - Phase Control Circuit
A phase control circuit can be used to control the power delivered to an AC load. The phase control circuit control the AC waveform, cutting the cycle to give full...
| 
