An oscilloscope is an signal analyzer and the function generator is a device that can generate waveform. This video is about how to use oscilloscope and the function generator. In this video, an oscilloscope, a function generator, a circuit box, connector cable and probe are used. First, connect the output of the function generator to the circuit box. The oscilloscope can be used To analyze two signal because it has two inputs. Then connect the circuit to the oscilloscope. Here is the video:
After that turn on the oscilloscope, from the oscilloscope we can see the signal. The waveform of the signal is sinewave because the function generator is set to generate sinewave. The display on the oscilloscope can be shifted up and down, right and left. Beside that, the oscilloscope can separate the signal with noise and the original signal.