This sine wave generator is adjustable between 15 Hz to 150 kHz. The circuit is basically a Wien-bridge oscillator, with multiple capacitor selection. Here is the schematic diagram:
A stereo 10k potentiometer is used to control the frequency. The dashed line connecting these two potentiometers show that both potentiometer has single axis.
Possibly Related Articles:
- High Frequency Waveform Generator
Waveform generator is very useful in electronic experiment and design. This circuit generate sine wave oscillation, but actually we can modify the circuit to generate triangle or square wave function.... - VFC110: Single Chip High-Frequency Voltage-to-Frequency Converter (VFC)
Using VFC110 chip, we can build a high frequency voltage-to-frequency converter. The features of this chip include the capability of high frequency operation, disable function, and an on-board precision 5V... - Triangular-Wave Generator
The circuit diagram below shows a constant amplitude triangular-wave generator. A variable frequency triangular wave whose amplitude is independent of frequency is provided by this circuit. As a reset circuit,... - High Performance Sawtooth Generator
This is a simple sawtooth generator circuit. The advantages of this circuit are low cost and produces an auxiliary square wave at the same frequency. This circuit can be used... - Function Generator Using CA3080 and CA3130 Op-Amps
The schematic diagram shown in the figure below show a function generator circuit using CA3130 in the integrator the threshold detection sections. Both triangular and square-wave signal are available from...
| 
