Make A Crystal Radio (3 of 3) – Video Tutorial
This is how to make crystal radio part 3. In this video, a explanation of the variant of crystal radio is shown. This is two part radio. This radio has two wires, they are antenna and earthing wires. And between two of them there is a diode.
The diode is used as bridge between that two connection. The earphone is connected to the antenna wire and the earthing wire. Basically, This radio is not receiving from the radio station. This radio receive the signal from the near area.
Related posts:
Altium Designer Schematic Capture and PCB Layout Part 2 - Video Tutorial
Automotive Ignition Coil - Video Tutorial
How To Create Arbitrary Pads in Altium Designer - Video Tutorial
How to Make Double Sided PCB Using Toner Transfer - Part 2 - Video Tutorial
How to Build Electronic Circuit - Video Tutorial