This is a video of kinetic remote control. This video shows step by step by step how to make a kinetic remote control. A kinetic remote control is a remote that doesn’t need a battery. This remote control using a kinetic energy to operated. To make this kinetic remote control we need a tube, a couple capacitors, diode, wire, circuit board magnet and voltage regulator. Here is the video tutorial:
This video shows the schematic diagram of the circuit. This remote draw the supply from the voltage that produced by magnet movement in the tube. The tube must equipped with the coil to produce an electrical energy. Then connect the coil on the tube to the circuit. After that connect the circuit with the main remote control circuit top replace the battery. To use this remote control we must shake it first.