A constant-current/constant-voltage linear charger for single-cell lithium-ion (li-ion) can be constructed using only a tiny battery charger controller chip EUP8054 and a few passive components. This tiny integrated circuit chip is suitable for various portable devices. This controller chip is also compatible with USB power specification, ideal for charging the battery when the device is [...]
This charger circuit is suitable for lead-acid battery, including flooded, gel, and AGM types. The automatic term means that this charger will stop charging automatically when the battery voltage reach a certain pint, indicating that the battery has been fully charged, and charging will be restarted if the battery voltage falls below that threshold. A [...]
This simple Batteries charger circuit is designed for NiMH/NiCd batteries. It need no micro-controller nor any programming. Linear Technology Corporation produce the LTC4060, an autonomous 1- to 4-cell, 0.4A to 2A linear NiMH and NiCd battery charger complete controller. Here are the main features:
No Sense Resistor or Blocking Diode Required
Complete Fast Charger Controller [...]
Many cheap battery chargers usually assume that charging the battery slowly is OK although the battery is already full of charges. All they do is usually charging the battery with constant current no matter if the battery is almost completely discharged or has been fully charged. Off course the battery wouldn’t be damaged immediately [...]
In application that demand for high current, Nicad (NiCd) rechargeable battery still has the unbeatable performance compared to NiMH and Lithium battery. The charger circuit here is smart in the way it handle the wrong polarity of the battery placement.
The core of this battery charger circuit is the Q2, configured a constant current source for [...]
© 2008 Free Circuit Diagram | RSS 
| DESIGN BY SUPER J MAN | Ported by GFXedit.com
