Below is video tutorial about how to assemble the crossover network for the TriTrix speaker system. The TriTrix speaker system uses a second order crossover. Second order mean thare are two part coil for each filter. To assemble this, we only need a glue gun, plan board, wire and the electrics components.
To assemble it, we can use a plain board. Put all component (2 coils, capacitor, and resistor) as order on the plain board, then stick it on the boar using the glue gun. Then we can make the connection on the board and soldering the wire to make it work. For further information, watch the entire video.